The Best In Class Are Found Here.
JIT: Security Windows for Thermographic Inspection
JIT: Security Windows for Thermographic Inspection:
JIT, is a Thermographic Inspection Window, basically a Lens composed of Polymer or Glass material, together with an aluminum or Stainless-steel frame.
The lens allows the passage of infrared radiation at the frequency used by thermal imagers for inspection. The windows are mounted on the panels in positions that allow inspection of the electrical components inside the panels.
The objective of the JIT® Thermographic Inspection Security Windows is to allow thermographic and UV inspections (Crystal lens) to be carried out without the need to open panels, cubicles, junction boxes, etc., increasing the security of the thermographers/electrician’s team. and operational reliability.
It allows inspections safely, as it makes it possible to carry out thermographic and UV measurements of the internal components of panels, cubicles, connection boxes, etc., without the need to open them, at any time, without depending on stops.
There is a significant gain in time in the execution of thermographic IR and Ultraviolet UV inspections, because with the installation of the JIT® window, the need to open covers and doors is eliminated, thus saving time during a thermographic inspection. Its cost is negligible compared to the losses that a production stoppage or loss of a panel represents.
Lens made of Calcium crystal, Barium crystal, I.R. Polymer.
- Resistant to arcing, vibration, moisture and impact.
- Compatible with all types of thermal imaging cameras on the market (short, medium and long wave Infrared) and Corona measurement cameras (UV).
- Allows thermographic inspection, visual inspection (Crystal lens), ultraviolet inspection (Crystal lens) and IR image fusion (Crystal lens).
- Lifetime warranty.
JIT models
JIT® 50
Viewing Diameter 64mm (2,5 “)
JIT® 75
JIT® 100
Select your JIT Security Windows for Thermographic Inspection.
Exemple
JIT75-IRC-V: (JIT) Safety window for thermographic inspection, (75) diameter in mm , (I) stainless steel structure, (R) Quick-JIT fixing system (thread), (C) Calcium fluoride glass lens, (V) polycarbonate cover 6mm.
Size: (75) Window diameter 75 mm – 3”
Material: (I) Stainless steel.
Fixation: (R) Quick-JIT for sheet under 7 mm (0,3”) thickness
Lens: (C) Calcium Fluoride Crystal.
Accessories: (V) JIT View (Polycarbonate 6 mm – 0,2”)
Advantages
• 100% compliant with NPFA codes and other standards for low and medium voltage panels.
• Any possibility of contact with busbars and energized components is eliminated, avoiding the risk of electrical arcs and shocks.
• The panels, cubicles, drawers and connection boxes do not need to be opened during the thermography execution, reducing the thermography execution time, eliminating the labor of electricians to open panels, cubicles, etc., as well as risks of accidents by contact.
• Thermographic inspection becomes simple and the periodicity can be adequate, reducing the interval between inspections, increasing operational reliability.
• Thermography can be performed on 100% of the assets. Without the windows, an average of 35% of which are not inspected, such as: motor connection boxes, generators, transformers and in some cases even medium voltage cubicles. In this case, the gain in operational reliability and occupational safety grows in the same proportion as the increase in asset inspection.
• Post-repair thermographic inspection can be carried out, increasing operational reliability.
